Orbit determination of BDS-3 satellite based on regional ground tracking station and inter-satellite link observations

The BeiDou global navigation satellite system (BDS-3) has established the Ka-band inter-satellite link (ISL) to realize a two-way ranging function between satellites, which provides a new observation technology for the orbit determination of BDS-3 satellites. Therefore, this study presents a BDS satellite orbit determination model based on ground tracking station (GTS) observations and ISL ranging observations firstly to analyze the impact of the ISL ranging observations on the orbit determination of BDS-3 satellites. Subsequently, considering the data fusion processing, the variance component estimation (VCE) algorithm is applied to the parameter estimation process of the satellite orbit determination. Finally, using the measured data from China’s regional GTS observations and BDS-3 ISL ranging observations, the effects of ISL ranging observations on the orbit determination accuracy of BDS-3 satellites are analyzed. Moreover, the impact of the VCE algorithm on the fusion data processing is evaluated from the aspects of orbit determination accuracy, Ka-band hardware delay parameter stability, and ISL ranging observation residuals. The results show that for China’s regional GTSs, the addition of BDS-3 ISL ranging observations can significantly improve the orbit determination accuracy of BDS-3 satellites. The observed orbit determination accuracy of satellite radial component is improved from 48 cm to 4.1 cm. In addition, when the initial weight ratio between GTS observations and ISL ranging observations is not appropriate, the various indicators which include orbit determination accuracy, ISL hardware delay, and ISL observation residuals were observed to have improved after the adjustment of the VCE algorithm. These results validate the effectiveness of the VCE algorithm for the fusion data processing of the GTS observations and ISL ranging observations.     

Detection of hydrothermal alteration zones using ASTER data in Nimu porphyry copper deposit,south Tibet,China

Advanced space-borne thermal emission and reflection radiometer (ASTER) data were evaluated for the hydrothermal alteration mapping of the Nimu porphyry copper deposit, southern Tibet. According to the metallogenic model for porphyry copper, we chose hydrothermal alteration mineral association and then established a remote sensing model. Relative absorption-band depth (RBD) and simple band combination methods in visible near infrared (VNIR) and shortwave infrared (SWIR) bands were used to retrieve information about lithological distributions. Principal component analyses (PCA) were applied to extract the prospecting information based on the spectral information of argillization mineral association, propylitization mineral association, and iron stained (limonite) effects. Results of the study match up well with known copper occurrences and a circular structure in study area, while circular structures usually have close relationship with mineralization. Combined with field validation, ASTER data are proved able to characterise the alteration zone of these porphyry deposits. With VNIR and SWIR bands, argillic, propylitic and ferritization alterations in a single deposit can be effectively discriminated.     

基于矢量跟踪的MEMS-SINS/GNSS深组合导航系统

针对在载体高动态运动时，由Doppler频移剧烈变化而导致的MEMS-SINS/GNSS组合导航系统精度降低的问题，修正了GNSS卫星信号模型，设计了一种深组合导航通道滤波器，并形成了完整的深组合导航方案。基于矢量跟踪结构的深组合导航方案，通过滤波器对载体的导航参数进行估计，将相互独立的各通道信息结合起来，并利用各卫星位置之间的关系，提高了高动态环境中的跟踪能力。仿真结果表明，基于矢量跟踪结构的深组合导航方案可以有效减少高动态对导航精度的影响，提高组合导航系统的输出精度。     

大气环境对直升机旋翼桨-涡干扰噪声辐射特性的影响

建立了一个适用于旋翼桨-涡干扰气动载荷计算的计算流体力学(Computational fluid dynamics,CFD)/自由尾迹耦合模型,为提高计算效率,提出了一种高效的耦合策略进行不同计算域间的信息交换策略。在此基础上,结合基于声类比法的FW-H方程构建了旋翼桨-涡干扰噪声的计算方法。应用所建立的方法,以OLS(Operational loads survey)旋翼为研究对象,深入分析了大气环境对旋翼噪声辐射特性的影响。研究发现:随着飞行高度的增加,旋翼噪声辐射特性发生了明显的改变,逐渐由桨盘前行侧转变为指向桨盘前方,噪声幅值先增大后减小。文中从桨-涡干扰距离、干扰位置变化角度计算分析了大气压力、音速及空气密度等环境参数对旋翼桨-涡干扰噪声辐射特性的影响,并得出了一些有实际意义的影响规律。     

风-雨耦合环境超高层三塔连体建筑雨压分布研究

以中国东南沿海某超高层三塔连体建筑为研究对象，以风-雨双向耦合算法为核心，基于计算流体动力学技术采用连续相和离散相模型进行风场和雨场的迭代模拟。首先基于9种风雨组合工况进行三塔连体建筑非定常脉动风场模拟，探讨超高层三塔连体建筑平均风压分布、表面速度流线和流场干扰机理。然后对比研究不同风雨组合工况下主塔表面雨滴附着数量、雨滴冲击力和雨压系数的分布规律，揭示风-雨耦合场中结构表面速度流线、雨滴运行轨迹和最终速度的作用机理。最后提炼出超高层三塔连体建筑最不利风-雨组合工况，并给出对应的雨压系数取值建议。研究表明：风-雨耦合环境下超高层连体建筑迎风面雨荷载作用最为显著，此时雨荷载与风荷载最大比值可达23.81%，局部测点最大雨压系数达到0.301，100 a重现期风速和强大暴雨组合为风-雨耦合作用的最不利组合工况。     

基于核主成分分析的空域复杂度无监督评估

空域复杂度评估作为衡量空域运行态势、管制员工作压力的关键手段，是运行调控的基础。由于影响因素众多，不同因素间耦合关联复杂，且标定样本很难获取，空域复杂度的准确评估被公认为航空领域的一个挑战性问题。提出了一种空域复杂度的无监督评估方法。首先通过核主成分分析挖掘原始样本各维度的非线性耦合关系，准确提取能够最大化复杂度评估信息量的主成分，进一步设计了可按需定制的主成分聚类方法，实现了无监督条件下空域复杂度的准确评估，为空域划分、流量管理提供了有效的技术支撑。     

Application of a PCA-DBN-based surrogate model to robust aerodynamic design optimization

An efficient method employing a Principal Component Analysis (PCA)-Deep Belief Network (DBN)-based surrogate model is developed for robust aerodynamic design optimization in this study. In order to reduce the number of design variables for aerodynamic optimizations, the PCA technique is implemented to the geometric parameters obtained by parameterization method. For the purpose of predicting aerodynamic parameters, the DBN model is established with the reduced design variables as input and the aerodynamic parameters as output, and it is trained using the k-step contrastive divergence algorithm. The established PCA-DBN-based surrogate model is validated through predicting lift-to-drag ratios of a set of airfoils, and the results indicate that the PCA-DBN-based surrogate model is reliable and obtains more accurate predictions than three other surrogate models. Then the efficient optimization method is established by embedding the PCA-DBN-based surrogate model into an improved Particle Swarm Optimization (PSO) framework, and applied to the robust aerodynamic design optimizations of Natural Laminar Flow (NLF) airfoil and transonic wing. The optimization results indicate that the PCA-DBN-based surrogate model works very well as a prediction model in the robust optimization processes of both NLF airfoil and transonic wing. By employing the PCA-DBN-based surrogate model, the developed efficient method improves the optimization efficiency obviously.     

基于模态局部化效应的微机械加速度计研究进展

模态局部化效应是安德森局部化在结构动力学中的一种具体表现形式,其利用振动模态的能量局部集中效应实现了灵敏度的大幅度提高。因此,模态局部化效应近年来逐渐被用于研制高精度的谐振式传感器。介绍了模态局部化效应的基本原理及发展历程,及其在各类谐振式传感器中的应用及研究现状,包括质量传感器、电荷传感器、位移传感器以及刚度传感器。最后,着重介绍了模态局部化效应在惯性敏感器件加速度计中的应用及研究现状。     

涡扇发动机低压部件通流耦合计算

为了研究各部件匹配与过渡段几何参数对发动机总体性能的影响,针对某涡扇发动机风扇、低压涡轮、内外涵道、掺混段和尾喷管等部件,基于周向平均Navier-St okes通流控制方程,采用时间推进有限体积法进行了部件耦合计算求解,将沿程各部件性能计算参数与试验做了对比,结果表明:在设计状态下发动机沿程各截面计算特征参数与试验值最大误差不超过5.0%,说明该通流耦合计算方法能够快速预估发动机总体性能,完善各部件匹配关系,在发动机总体设计初期有一定工程应用价值。     

基于主成分分析法的地磁导航适配区域选择

地磁场信息量越大的区域,导航性能越好。借用数理统计和信息论中的概念,设定了多个评价地磁场信息特点的指标,并通过主成分分析法,排除了相关指标,得到综合指标值,客观、定量地分析了适配区的导航性能,从而选择最佳导航适配区。仿真表明,本文方法是一种选择地磁导航工作区的有效方法,选择的适配区导航误差小。